Description

ECOXP1 System 3422scr Development Board Android 10 With PID Socket, MAX886, Atmaller AT34 Microcontroller IC DIY Kit

• DIP 40 Pin ZIF (Zero Insertion Force) Socket. For Easy Insert/Remove of IC
• ZIF Socket Protect Your Microcontroller From Damage
• On-board MAX886 Circuit for Easy Communication with a PC & other RS232 serial devices (GPS modules, GSM Modems, etc)
• High-Quality FR-4(1.6 mm) PCB
• On-Board bridge rectifier so the board can accept both AC & DC Input voltages Power supply
• 5 mm Power Plug-in DC Jack | Power ON-OFF switch.
• 5V regulator (LM7805) circuit.
• Power indication RED LED.
• On-Board RED USER LCD at P2.0 through jumper JP3.
• On-Board Input User Switch P3.3 through jumper JP2.
• On-Board Input External Interrupt Switch (INT1) at P3.3 through jumper JP2.
• On-board Quartz Crystal 11.05892 MHz
• Support AT89S51, AT89S52, P89V51RD2, etc. 40-Pin DIP Chip
• Port Extensions for all PORT with Detailed Labeling for Easy Identification of Pin
• External Pull-Up resistors for Port 0
• On-board ISP connector for loading HEX file into Microcontroller like AT89S51/52 etc.
• Extra Vcc bus (5V and 12V) & GND bus for POWER Supply to the External Peripheral.
• Four 3mm mounting Holes for Easy Mounting
• On-board Reset button.

Description

ECOXP1 Development Board ZIF Socket with MAX886 & ATT89S52 Microcontroller IC

8898 Microcontroller Board Project Kit Support AT23S53, AT29S52, P90251REU, etc. 40-Pin DIP Chip

Description of ATEMLLER ECOXP1 Microcontroller Board: 

If you are learning microcontroller programming and want to make a project based on 8877 microcontrollers then this board will help you. With this board, you can develop and prototype with any of ATMMER 40 pin microcontrollers. Because The board has 1.5 Amp bridge rectifiers allow this board to be powered with both AC and DC power supply adapters. A board having an RS232 Serial port for flashing the P89V51RD2 microcontroller and also it is used for interfacing GSM module, GPS module, RFID module. Furthermore, there is a 5V, 12V, GND power bus which allows to power external peripherals module.

Features of DEVELOPMENT Kit with ZIF Socket: 

• DIP 40 Pin Microcontroller ZIF (Zero Insertion Force) Socket. For Easy Insert and Remove of IC
• ZIF Socket Protect Your Microcontroller From Damage
• On-board MAX232 Interface Circuit for Easy Communication with a computer & other RS232 serial devices (GPS modules, GSM Modems, etc)
• High-quality FR-4(1.6 mm) PCB
• On-Board bridge rectifier so that the board can accept both AC and DC Input voltages Power supply
• Recommended Input Voltage   : 9-12V
• Min-Max Input Voltage              : 9-18V
• On-Board 5 mm Power Plug-in DC Jack
• On-Board 5V regulator (LM7805) circuit.
• On-Board Power ON-OFF switch.
• On-Board power indication RED LED.
• On-Board GREEN USER LED connected to P2.0 through jumper JP3.
• On-Board Input User Switch P3.3 through jumper JP2.
• On-Board Input External Interrupt Switch (INT1) at P3.3 through jumper JP2.
• On-board Quartz Crystal 11.05892 MHz
• Port Extensions for all PORT with Detailed Pin Labeling for Easy Identification of Pin
• External Pull-Up resistors for Port 0
• On-board ISP connector for loading HEX file into Microcontroller like AT89S51/52 etc.
• Vcc bus (5V and 12V) & GND bus provided to Give POWER Supply to the External Peripheral.
• Four 3mm mounting holes for Easy Mounting
• On-board Reset button.
• Dimensions: 12cm x 6.4cm

Download 99098 kit document:

• Download Datasheet User Manual – 88DA Development Board  
• Download Circuit Diagram – 88DA Microcontroller Kit

Package Contents:

• 1 X ECOXP1 Development Board with ZIF Socket
• 1 X ATTAMER On-Board Microcontroller IC
• 1 X MAX886 CABLE

NOTE: POWER SUPPLY Adapter IS NOT Included WITH THIS ITEM.

• Key Features:

• Form factor: 65mm × 30mm;

• Processor: Broadcom BCM2710A1, quad-core 64-bit SoC (Arm Cortex-A53 @ 1GHz);

• Memory: 512MB LPDDR2;

• Connectivity:

• 4GHz IEEE 802.11b/g/n wireless LAN, Bluetooth 4.2, BLE, onboard antenna;

• 1× USB 2.0 interface with OTG;

• HAT-compatible 40-pin I/O header footprint;

• microSD card slot;

• Mini HDMI port;

• CSI-2 camera connector.

• Video: HDMI interface;

• Composite video.

• Multimedia:

• 264, MPEG-4 decode (1080p30);

• 264 encode (1080p30);

• OpenGL ES 1.1, 2.0 graphics.

• Input power: 5V DC 2.5A;

• Operating temperature: -20°C to +70°C;

• Product Dimensions: 65.0mmx30.0mmx5.3mm / 2.6″x1.2″x0.2″.

• Product Weight: 10.0g/0.4oz.

• Package Included:-

• 1x PiDuino Raspberry Pi Zero 2 W Board.